Lesson 03 · Phone setup and camera view

Make your phone work for you

Control timer, height, distance and crop before changing your body.

5 short chaptersOne visual per chapterNarration pending
Jump to this lesson’s chapters ↓
Your progress on this browser0 of 5 chapters complete

Mark a chapter complete after you practise it. Sign in with the same Miles Flow account to share course progress with the app.

Directing someone else? Open the photographer course
Your goal

By the end, you can:

  • Set up a repeatable solo shoot
  • Choose a helpful camera height and distance
  • Frame yourself with room to move
Chapter 01 of 05 · Lesson 03

Create a reliable solo setup

Chapter 01 audio pendingCreate a reliable solo setup · about 1 min

Read this chapter’s narration while its recording is prepared.

Render filename: lesson-03-chapter-01.mp3

Put your phone on a stable stand or safe surface. Check that it cannot fall and that the path to your mark is clear. Use a timer or remote if your phone supports one. Take a test while standing on the mark, then check the whole frame before doing any pose work.

  • Stabilise the phone safely.
  • Use a timer or remote.
  • Mark where you stand or sit.

Try it: Set one stable phone position and take a neutral full-body test.

Read chapter 01 narration

Put your phone on a stable stand or safe surface. Check that it cannot fall and that the path to your mark is clear. Use a timer or remote if your phone supports one. Take a test while standing on the mark, then check the whole frame before doing any pose work.

Keep the setup simple enough to repeat. A floor mark and a note about phone height can save many takes. Never balance a phone where it might fall onto someone or block a shared space.

Next chapter →
Chapter 02 of 05 · Lesson 03

Test phone height

Chapter 02 audio pendingTest phone height · about 1 min

Read this chapter’s narration while its recording is prepared.

Render filename: lesson-03-chapter-02.mp3

Phone height changes what the camera sees. Start near the height of the part you want to emphasise, then take one slightly higher and one slightly lower frame while keeping your pose comfortable. Look at how the face, torso, legs and background overlap. Do not assume one height is best for everyone.

  • Take a level baseline.
  • Change height modestly.
  • Compare face, hands and background.

Try it: Make three matched frames from low, middle and high phone marks; choose for your goal.

Read chapter 02 narration

Phone height changes what the camera sees. Start near the height of the part you want to emphasise, then take one slightly higher and one slightly lower frame while keeping your pose comfortable. Look at how the face, torso, legs and background overlap. Do not assume one height is best for everyone.

Keep the phone level for the first comparison. A high phone tilted down is a different choice from a high phone held level. Compare the actual results rather than following a flattering-angle rule.

Next chapter →
Chapter 03 of 05 · Lesson 03

Separate distance from zoom

Chapter 03 audio pendingSeparate distance from zoom · about 1 min

Read this chapter’s narration while its recording is prepared.

Render filename: lesson-03-chapter-03.mp3

When the phone is very close, nearer features can appear relatively larger than farther ones. Moving the phone back changes that relationship. Zooming or cropping from one fixed position changes framing instead. To learn the difference, photograph yourself from two camera distances, then crop the farther frame to a similar subject size.

  • Move the phone to test perspective.
  • Use zoom or crop for framing from a fixed spot.
  • Check near hands and face before selecting.

Try it: Compare a near and farther phone position with similar final face size.

Read chapter 03 narration

When the phone is very close, nearer features can appear relatively larger than farther ones. Moving the phone back changes that relationship. Zooming or cropping from one fixed position changes framing instead. To learn the difference, photograph yourself from two camera distances, then crop the farther frame to a similar subject size.

Choose a distance that gives the representation you want and leaves enough space for your action. Avoid digital zoom that destroys detail when a safe camera move or later crop would work better.

Next chapter →
Chapter 04 of 05 · Lesson 03

Leave room in the frame

Chapter 04 audio pendingLeave room in the frame · about 1 min

Read this chapter’s narration while its recording is prepared.

Render filename: lesson-03-chapter-04.mp3

For a full-body image, check the feet, hands and space above the head before using the timer. If you plan to turn or step, leave room in the direction of movement. For a tighter portrait, decide where the frame ends rather than accidentally cutting through an important hand or gesture.

  • Check the full outline before posing.
  • Leave room for motion.
  • Keep a wider safety frame.

Try it: Make wide, medium and close crops of one original frame; note which tells your story.

Read chapter 04 narration

For a full-body image, check the feet, hands and space above the head before using the timer. If you plan to turn or step, leave room in the direction of movement. For a tighter portrait, decide where the frame ends rather than accidentally cutting through an important hand or gesture.

Use a grid if it helps you keep the phone level, but do not let grid lines dictate every composition. Take one wider safety frame; you can crop it after you know which action worked.

Next chapter →
Chapter 05 of 05 · Lesson 03

Build a repeatable camera map

Chapter 05 audio pendingBuild a repeatable camera map · about 1 min

Read this chapter’s narration while its recording is prepared.

Render filename: lesson-03-chapter-05.mp3

Write down the phone's height, distance and side position for a frame you like. Make one small change at a time: first height, then distance, then side. Keep your pose and light steady. This small map teaches you what the camera did without asking your body to solve every problem.

  • Record a baseline camera mark.
  • Change one camera variable per frame.
  • Save the mark that serves this photo.

Try it: Create a four-frame camera map and note the position used for the final image.

Read chapter 05 narration

Write down the phone's height, distance and side position for a frame you like. Make one small change at a time: first height, then distance, then side. Keep your pose and light steady. This small map teaches you what the camera did without asking your body to solve every problem.

Choose the camera mark that makes your intended gesture readable and gives you a representation you like. Save it as a starting point, not a permanent rule.

Continue to another lesson →