Photographer lesson 04 · Body geometry and weight

Build a pose from the ground up

Use support, weight and body direction to make a pose clear, stable and comfortable.

8 short chaptersOne visual per chapterNarration pending
Jump to this lesson’s chapters ↓
Your progress on this browser0 of 8 chapters complete

Mark a chapter complete after you practise it. Sign in with the same Miles Flow account to share course progress with the app.

Taking photos of yourself? Open the self-posing course
Chapter 01 of 08 · Lesson 04

Where the body finds support

Chapter 01 audio pendingWhere the body finds support · about 1 min

Read this chapter’s narration while its recording is prepared.

Render filename: body-geometry-chapter-01.mp3
Start here

The idea in one minute

The ground, seat or wall carries the pose. Start there, then change one body direction and inspect the camera view.

By the end, you can:

  • Identify the support and weight in a pose
  • Separate weight shift from torso turn
  • Adapt the same visual idea to a comfortable seated or standing position
Read chapter 01 narration

In this lesson we move from the idea of a pose to the mechanics of the body. A person needs somewhere to place their weight. Start by noticing the floor, chair or wall that supports them. Ask whether the position can be held easily for a few frames. The aim is a deliberate photograph, not an endurance test.

A change in weight affects the whole figure. With weight shared between both feet, a person may appear centred. With more weight on one foot, the free leg can bend and the hips and shoulders may settle into a different relationship. These are visual options, not rules about which body shape is better. Photograph the same person from one camera position so you can see what actually changed.

Next chapter: Support, direction and outline →
Chapter 02 of 08 · Lesson 04

Support, direction and outline

Chapter 02 audio pendingSupport, direction and outline · about 2 min

Read this chapter’s narration while its recording is prepared.

Render filename: body-geometry-chapter-02.mp3
1 · SupportWhere does the person's weight rest?
2 · DirectionWhich way do feet, hips and torso point?
3 · OutlineWhat edges and spaces does the camera record?
Read chapter 02 narration

Use a three-step check. Find support first. Set a comfortable direction for the feet, hips and torso second. Then inspect the outline in the camera frame. A pose can feel clear in the room while an arm disappears against the torso in the photograph. The camera view is part of the geometry.

Avoid correcting every body part at once. Begin with a base frame. Ask for a small weight shift, or turn the torso a little while the feet stay still. Review the difference. If the person has to twist, balance or hold tension to make the picture, change the camera or the setting instead.

The most useful practice is to make a controlled set: equal weight, a comfortable weight shift, then the same shift with a slight torso turn. Keep camera height and distance fixed. Look at the outline of each leg, the relationship between shoulders and hips, and the space around the arms. Name what you see before choosing a favourite.

Next chapter: Find stable support before arranging shape →
Chapter 03 of 08 · Lesson 04

Find stable support before arranging shape

Chapter 03 audio pendingFind stable support before arranging shape · about 1 min

Read this chapter’s narration while its recording is prepared.

Render filename: body-geometry-chapter-03.mp3

A stable base makes small changes visible and repeatable.

  • Ask which foot, chair or surface carries weight.
  • Make a neutral frame before shifting weight.
  • Reduce the shift if the person needs to balance.

Look for this: Notice how the free knee and outer outline change while the camera stays fixed.

Read chapter 03 narration

Every pose has a support system. On the floor, ask which foot carries more weight. On a chair, notice whether the seat supports the pelvis and whether both feet can rest comfortably. At a wall or table, a light touch can give a hand a reason to be there. Support is the starting point because it makes later cues easier to follow.

Compare a balanced stance with a small shift onto one leg. Keep the face, hands and camera still. Look for the free knee relaxing and the outline changing. If the person starts to sway, reduce the shift. A visible difference does not require an extreme position.

Next chapter: Separate weight shift from body turn →
Chapter 04 of 08 · Lesson 04

Separate weight shift from body turn

Chapter 04 audio pendingSeparate weight shift from body turn · about 1 min

Read this chapter’s narration while its recording is prepared.

Render filename: body-geometry-chapter-04.mp3

Test a shift and a turn as separate experiments.

  • Shift weight while facing the same direction.
  • Reset, then turn gently without changing the camera.
  • Move the camera if a body twist feels constrained.

Look for this: Compare what changed at the hips and shoulders in each panel.

Read chapter 04 narration

A weight shift and a body turn are different variables. A shift changes how the person stands within the same direction. A turn changes which planes of the torso and shoulders the camera sees. Make one frame for each so you can attribute the result to a specific cue.

Let the person turn within their natural range. Do not lock the hips and force the shoulders into an uncomfortable twist. When the direction feels constrained, move the camera around the person instead. The photograph records their relationship to the camera, so either side of that relationship can change.

Next chapter: Read shoulders, hips and the outer line →
Chapter 05 of 08 · Lesson 04

Read shoulders, hips and the outer line

Chapter 05 audio pendingRead shoulders, hips and the outer line · about 1 min

Read this chapter’s narration while its recording is prepared.

Render filename: body-geometry-chapter-05.mp3

Read broad body directions and small gaps together.

  • Identify shoulder and hip directions in the frame.
  • Check whether an arm merges with the torso.
  • Inspect the photograph at phone size.
Controlled comparison

What changes the silhouette?

Keep fixedChangeInspect
Camera and lightWeight distributionLeg line and hip direction
Camera and lightTorso directionVisible body planes and shoulder overlap
Body positionCamera viewOuter line and internal gaps

Look for this: Find the smallest separation that makes the intended gesture readable.

Read chapter 05 narration

Shoulders and hips create broad directions in the frame. They may appear level, gently diagonal or more turned away from the camera. Read those directions together with the background lines. A doorway can reinforce a vertical stance; a sloping arm can add another diagonal. The useful question is whether the combined shape supports the intended image.

Inspect the pose at phone size. If the near arm merges with the torso, give it a small gap or change the camera position. If both legs look like one line, move the free foot only as far as feels natural. Small separations often make a body position easier to read without making it theatrical.

Next chapter: Choose arm and leg space deliberately →
Chapter 06 of 08 · Lesson 04

Choose arm and leg space deliberately

Chapter 06 audio pendingChoose arm and leg space deliberately · about 1 min

Read this chapter’s narration while its recording is prepared.

Render filename: body-geometry-chapter-06.mp3

The empty space around a limb can help explain the action.

  • Look for a hand or elbow hidden against clothing.
  • Try a small gap before a large gesture.
  • Use camera or background changes when the pose is already comfortable.

Look for this: Compare the arm and leg edges without ranking body shapes.

Read chapter 06 narration

The spaces around limbs are part of the pose. A hand close to the body can form a quiet compact shape. A small elbow gap can reveal a gesture. Neither is automatically more flattering; the choice depends on what the photograph needs to show. Compare the outer edge and the spaces inside the figure rather than following a fixed formula.

Place the free foot where the person can step away easily. Avoid asking them to hold a deep bend, raised heel or wide stance just for an outline. If the shape is unclear, try changing crop or background before increasing physical effort.

Next chapter: Adapt the geometry to the person →
Chapter 07 of 08 · Lesson 04

Adapt the geometry to the person

Chapter 07 audio pendingAdapt the geometry to the person · about 1 min

Read this chapter’s narration while its recording is prepared.

Render filename: body-geometry-chapter-07.mp3

Keep the idea of a pose while changing its physical form.

  • Offer a seated or supported version.
  • Ask what feels sustainable to the subject.
  • Preserve the intended direction or gesture, not exact joint angles.

Look for this: Identify the shared visual idea across standing and seated versions.

Read chapter 07 narration

A standing reference can become a seated pose by preserving the underlying idea: support, direction and a visible gesture. Ask what feels comfortable before moving the person. Clothing, mobility, pain and personal boundaries affect which actions are available. The camera can move to meet the person instead of treating a reference as a compulsory shape.

Review the result with the person. Ask whether the pose feels like them and whether they would hold it again. If not, keep the intention and change the mechanics. A technically clear outline is only one part of a successful portrait.

Next chapter: Guided practice →
Chapter 08 of 08 · Lesson 04

Guided practice

Chapter 08 audio pendingGuided practice · about 1 min

Read this chapter’s narration while its recording is prepared.

Render filename: body-geometry-chapter-08.mp3
Compare the frames

A three-frame weight and direction test

FrameChangeObserve
1Balanced supportBaseline stance and outline
2Small weight shiftFree leg and hip line
3Same shift, gentle torso turnShoulder overlap and outline
Your turn

Try it yourself

Make three frames with the same camera position: weight centred, weight shifted, then weight shifted with a gentle torso turn. Annotate only the visible changes. Repeat seated if standing is uncomfortable.

Remember: Find support, change one body direction, then read the camera's outline.
Keep these five ideas

Lesson recap

  1. Begin with stable support.
  2. Change weight and torso direction separately.
  3. Read the body in the camera frame.
  4. Use small gaps to reveal intended gestures.
  5. Adapt the pose to the person.
Read chapter 08 narration

Keep the person involved. Ask whether the position feels sustainable and offer seated or supported versions. There is no universal correct stance. The pose succeeds when its shape helps the photograph and the person can inhabit it comfortably.

Make three frames with the same camera position: weight centred, weight shifted, then weight shifted with a gentle torso turn. Annotate only the visible changes. Repeat seated if standing is uncomfortable.

Continue to another lesson →